Quanzhou spot liquid detergent mixing tank where to sell stainless steel cans: Alias: Move cylinders, pull-cylinder, temporary storage tanks, cans. Uses: Stainless Steel Cylinder main supporting dispersing machine, grinding machines, emulsifying machines and other equipment to use for paint, interior and exterior paint, dye, texture paint, pigments, paints, inks, adhesives, food and other chemical materials, mixing, dispersing , grinding, emulsification step. 1, volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2, the heating method: electric rods inserted into the jacket, uniform heating without cold zone. Conducting oil or water injection jacket for heating medium, generating heat for heating the tank material. 3, the material heating temperature: ≤100 ℃; material heating time: 30min ~ 90min (depending on process requirements). 4, the temperature control: high and low temperature thermocouple temperature measurement device connection and control the temperature, and can adjust the temperature of the material. 5, tank: mirror polished inner surface roughness Ra≤0.4μm. 6, cover: Opening for two removable cover for easy cleaning, inside and outside mirror polished surface (roughness Ra≤0.4μm). 7, the tank bottom structure: R after spinning into a corner, and the inner tank welding, no dead ends polished, put the net material without retention. 8, the jacket forms: whole jacket for added thermal oil or water, so that work to achieve the best heating and cooling purposes. 9, insulation material: EPE filled, rock wool or polyurethane foam casting, keeping the temperature difference with the outside world, to insulation effect. 10, the shell surface treatment: mirror-polished or matt colors or 2B 2B frosted matte surface treatment. 11, stirring device: the top center stirring gear output shaft and impeller shaft is connected Looper, easy disassembly and cleaning. 12, stirring speed: 15 ~ 120r / min (fixed speed); paddle forms: box type, anchor, paddle, turbine, etc. (according to process requirements). 13 feet in the form of: Tubular or suspension lug. 14, device configuration: electrical control box, temperature controller, solid to liquid and export, import and export media (intake, exhaust oil), vent (oil spill hole) and so on. 15, material: SUS304 tank or SUS316L; jacket for Q235-B or SUS304; outer protective shell is SUS304. 16, all out of the nozzle opening process and are used within the tank flange welding arc transition process smooth and easy to clean no dead ends, beautiful appearance.