Yueyang, Yiyang ink paint mixing tanks deployed prices detergent manufacturer of stainless steel stirred tank mixing tank and properties that use the material for mixing, compounding, reconcile, homogenizing, etc., in accordance with the requirements of the production process design structure and configuration can be standardized and humane. In the mixing process can be realized feed control, discharge control, mixing control and other manual and automatic control. Stainless steel stirred tank by the body, lid, stirrer, bearing, gear, shaft sealing device and other components, but also according to the process required to configure the heating means or cooling means. Stainless steel mixing tank, mixing lid, blender, seal and other materials can be chosen depending on the process requirements of carbon steel or stainless steel and other materials to produce. Stirred tank lid and stir coupling flange sealing or welding can join. Stainless steel mixing tank with a lid can be moved into the material according to process requirements, the material was observed, temperature, pressure, steam distillation, and other process safety vent hole. The upper lid is equipped with gear (motor or gear), driven by the drive shaft stirred tank agitator. The shaft sealing device can be mechanical seal or packing, labyrinth seals and other forms (based on user-determined needs). Because the production process requirements of different users, can be configured paddle agitator, anchor type, frame type, spiral and other forms. If you have other requirements can be linked with the factory, separate design. 1, volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2, the heating method: electric rods inserted into the jacket, uniform heating without cold zone. Conducting oil or water injection jacket for heating medium, generating heat for heating the tank material. 3, the material heating temperature: ≤100 ℃; material heating time: 30min ~ 90min (depending on process requirements). 4, the temperature control: high and low temperature thermocouple temperature measurement device connection and control the temperature, and can adjust the temperature of the material. 5, tank: mirror polished inner surface roughness Ra≤0.4μm. 6, cover: Opening for two removable cover for easy cleaning, inside and outside mirror polished surface (roughness Ra≤0.4μm). 7, the tank bottom structure: R after spinning into a corner, and the inner tank welding, no dead ends polished, put the net material without retention. 8, the jacket forms: whole jacket for added thermal oil or water, so that work to achieve the best heating and cooling purposes. 9, insulation material: EPE filled, rock wool or polyurethane foam casting, keeping the temperature difference with the outside world, to insulation effect. 10, the shell surface treatment: mirror-polished or matt colors or 2B 2B frosted matte surface treatment. 11, stirring device: the top center stirring gear output shaft and impeller shaft is connected Looper, easy disassembly and cleaning. 12, stirring speed: 15 ~ 120r / min (fixed speed); paddle forms: box type, anchor, paddle, turbine, etc. (according to process requirements). 13 feet in the form of: Tubular or suspension lug. 14, device configuration: electrical control box, temperature controller, solid to liquid and export, import and export media (intake, exhaust oil), vent (oil spill hole) and so on. 15, material: SUS304 tank or SUS316L; jacket for Q235-B or SUS304; outer protective shell is SUS304. 16, all out of the nozzle opening process and are used within the tank flange welding arc transition process smooth and easy to clean no dead ends, beautiful appearance.